GL-18L Gantry Machining Center

Parameters	Unit	G2518L	G3018L	G3518L
Door width	mm	1800	1800	1800
X-axis	mm	2600	3100	3600
Y-axis Travel	mm	1800	1800	1800
Z-axis	mm	850(1050)	850(1050)	850(1050)
From spindle nose to worktable face	mm	200-1050(200-1250)	200-1050(200-1250)	200-1050(200-1250)
Table width	mm	1600	1600	1600
T-slot	mm	22	22	22
bearing	t	7	8	9
Spindle type		Belt 1:1.33	Belt 1:1.33	Belt 1:1.33
Spindle taper hole specification		BT50	BT50	BT50
Spindle speed	rpm	6000	6000	6000
Main motor power	kW	15/18.5	15/18.5	15/18.5
Spindle Torque	N.m	190/313	190/313	190/313
Spindle box section	mm	350×400	350×400	350×400
X-axis Rapid Traverse	m/min	16	16	12
Y-axis Rapid Traverse	m/min	16	16	16
Z-axis Rapid Traverse	m/min	16	16	16
Cutting Speed	m/min	10	10	10
Positioning Accuracy X（half-closed loop）	mm	0.019	0.02	0.021
Positioning Accuracy Y（half-closed loop）	mm	0.018	0.018	0.018
Positioning Accuracy Z（half-closed loop）	mm	0.017	0.017	0.017
Repeatability Accuracy X（half-closed loop）	mm	0.014	0.015	0.016
Repeatability Accuracy Y（half-closed loop）	mm	0.012	0.012	0.012
Repeatability Accuracy Z（half-closed loop）	mm	0.008	0.008	0.008
Power capacity	Kva	30	30	30
Air source pressure	Mpa	0.65	0.65	0.65
Machine size	mm	4800	4800	4800
height
Floor area (about)	mm×mm	7885X5000	8885X5000	9885X5000
Machine weight	T	20.5	22.5	24.5