GL-42L Gantry Machining Center

Parameters	Unit	G10542L	G12542L	G14542L
Door width	mm	4200	4200	4200
X-axis	mm	10500	12500	14500
Y-axis Travel	mm	4300(4800)	4300(4800)	4300(4800)
Z-axis	mm	1250(1500)	1250(1500)	1250(1500)
From spindle nose to worktable face	mm	200-1450(200-1700)	200-1450(200-1700)	200-1450(200-1700)
Table width	mm	3500	3500	3500
T-slot	mm	28	28	28
bearing	t	36	36	36
Spindle type		Direct connection + reduction gearbox	Direct connection + reduction gearbox	Direct connection + reduction gearbox
Spindle taper hole specification		BT50	BT50	BT50
Spindle speed	rpm	4500	4500	4500
Main motor power	kW	30/37	30/37	30/37
Spindle Torque	N.m	996.4/1228	996.4/1228	996.4/1228
Spindle box section	mm	450×450	450×450	450×450
X-axis Rapid Traverse	m/min	8	8	8
Y-axis Rapid Traverse	m/min	10	10	10
Z-axis Rapid Traverse	m/min	10	10	10
Cutting Speed	m/min	6	6	6
Positioning Accuracy X（half-closed loop）	mm	0.047	0.054	0.061
Positioning Accuracy Y（half-closed loop）	mm	0.029	0.029	0.029
Positioning Accuracy Z（half-closed loop）	mm	0.018	0.018	0.018
Repeatability Accuracy X（half-closed loop）	mm	0.029	0.034	0.04
Repeatability Accuracy Y（half-closed loop）	mm	0.019	0.019	0.019
Repeatability Accuracy Z（half-closed loop）	mm	0.008	0.008	0.008
Power capacity	Kva	80	80	80
Air source pressure	Mpa	0.65	0.65	0.65
Machine size (height)	mm	6900	6900	6900
Floor area (about)	mm×mm	27800X8000	31300X8000	35300X8000
Machine weight	T	122	137	152