GMC24 Gantry Machining Center

Parameters	Unit	GMC3024L	GMC3524L	GMC4024L	GMC4524L
Door width	mm	2400	2400	2400	2400
X-axis	mm	3000	3500	4000	4500
Y-axis Travel	mm	3000	3000	3000	3000
Z-axis	mm	850	850	850	850
From spindle nose to worktable face	mm	200-1050	200-1050	200-1050	200-1050
Table width	mm	1800	1800	1800	1800
T-slot	mm	22	22	22	22
bearing	t	15	13	17	18
Spindle type	r/min	8000	8000	8000	8000
Spindle form		BT50	BT50	BT50	BT50
Main motor power	Kw	22/26	22/26	22/26	22/26
Spindle Torque	N.m	560/660	560/660	560/660	560/660
Spindle box section	mm	400	400	400	400
Spindle taper hole specification		BT50	BT50	BT50	BT50
X-axis Rapid Traverse	m/min	16	16	16	16
Y-axis Rapid Traverse	m/min	16	16	16	16
Z-axis Rapid Traverse	m/min	16	16	16	16
Cutting Speed	m/min	8	8	8	8
Positioning Accuracy X（half-closed loop）	mm	0.018	0.02	0.021	0.024
Positioning Accuracy Y（half-closed loop）	mm	0.018	0.018	0.018	0.018
Positioning Accuracy Z（half-closed loop）	mm	0.011	0.011	0.011	0.011
Repeatability Accuracy X（half-closed loop）	mm	0.011	0.013	0.014	0.015
Repeatability Accuracy Y（half-closed loop）	mm	0.012	0.012	0.012	0.012
Repeatability Accuracy Z（half-closed loop）	mm	0.006	0.006	0.006	0.006
Power capacity	Kva	60	60	60	60
Air source pressure	Mpa	0.65	0.65	0.65	0.65
Machine size (height)	mm	5000	5000	5000	5000
Floor area (about)	mm×mm	9800×6000	10800×6000	11800×6000	12800×6000
Machine weight	T	30	33	36.5	40
controller		FANUC/SIEMENS	FANUC/SIEMENS	FANUC/SIEMENS	FANUC/SIEMENS