GMC37 Gantry Machining Center

Parameters	Unit	GMC5537L	GMC6537L	GMC8537L	GMC10537L
Door width	mm	3700	3700	3700	3700
X-axis	mm	5500	6500	8500	10500
Y-axis Travel	mm	4500	4500	4500	4500
Z-axis	mm	1250	1250	1250	1250
From spindle nose to worktable face	mm	400-1650	400-1650	400-1650	400-1650
Table width	mm	3200	3200	3200	3200
T-slot	mm	28	28	28	28
bearing	t	28	32	36	40
Spindle type	r/min	6000	6000	6000	6000
Spindle form		Direct connection	Direct connection	Direct connection	Direct connection
Main motor power	Kw	22/26	22/26	22/26	22/26
Spindle Torque	N.m	770/910	770/910	770/910	770/910
Spindle box section	mm	450	450	450	450
Spindle taper hole specification		BT50	BT50	BT50	BT50
X-axis Rapid Traverse	m/min	12	12	12	12
Y-axis Rapid Traverse	m/min	12	12	12	12
Z-axis Rapid Traverse	m/min	12	12	12	12
Cutting Speed	m/min	10	10	8	8
Positioning Accuracy X（half-closed loop）	mm	0.026	0.031	0.035	0.044
Positioning Accuracy Y（half-closed loop）	mm	0.023	0.023	0.023	0.023
Positioning Accuracy Z（half-closed loop）	mm	0.014	0.014	0.014	0.014
Repeatability Accuracy X（half-closed loop）	mm	0.018	0.021	0.023	0.029
Repeatability Accuracy Y（half-closed loop）	mm	0.016	0.016	0.016	0.016
Repeatability Accuracy Z（half-closed loop）	mm	0.008	0.008	0.008	0.008
Power capacity	Kva	60	60	60	60
Air source pressure	Mpa	0.65	0.65	0.65	0.65
Machine size (height)	mm	6600	6600	6600	6600
Floor area (about)	mm×mm	14800×7900	16800×7900	22200×7900	26200×7900
Machine weight	T	87.5	100	120.5	135
controller		FANUC/SIEMENS	FANUC/SIEMENS	FANUC/SIEMENS	FANUC/SIEMENS